产品主要功能：

1遥控启动，免匙驾驶

2遥控熄火，防盗防抢

3喇叭报警，方向灯闪烁

4一键寻车，超车警示

5灵敏度自由调节

6采用滚动动态学习编码，防复制，破解难度更大，更安全。

7，产品断电带有记忆功能。

8，主机超小设计，防水，超低功耗，防止电瓶电量流失

10 内部电路设计优化，距离更远，抗干扰更强，遥控器采用千万组码密码芯片，非自编码（大大减小重码及破解的机率）

性能参数：

1、额定工作电压：12V

2、静态电流：≤3.5mA

3、发射、接收频率：315MHZ

4、遥控有效距离：<150米

5、报警声级：≥125dB

6、工作温度范围：-15℃--- +80℃

产品带彩盒重量：0.243kg

彩盒尺寸：15.8*6.5*9cm

Specification:

100% brand new.

Working voltage: For DC 12V (9V~14V)

Static Current: <=4mA

Working temperature: -10℃~+50℃

Remote control working voltage:DC6V/9V/12V

Remote control frequency range: 315Mhz or 433Mhz

Remote control distance: open areas《150M

Item Size: like the picture show.

Package Size: about 15.8cm(L) X 9cm(W) X 6.5cm(H)

Features:

- 100% Brand new.

- Phonic alarm, it can be use to locate your motorcycle

- Engine immobilization and anti-hijacking functionality

- Four sensitivity alarm settings

- This is a simple DIY installation unit with no special tools needed

Function Key: (4 buttons)

Arm/Anti-robbery: Remote lock

Disarm: Remote unlock style

Remote Start Engine: Remote start style

Find Vehicle: A bell style

Functions:

1. Arm: Press the Arm/Anti-robbery button, the indicator light flashes once, the siren beep once and the status of alarm will be activated automatically after 3 seconds.

2. Disarm: Press the Disarm button, the indicator light flashes 2 times and the siren beep 2 times, then the alarm system is in the "Disarm" mode.

3. Remote Start ON: Within 2 seconds, the connection press the start button twice, to start the engine.

4. Remote Start OFF: In the start state, Press the Disarm button to stop the engine.

5. Find Vehicle: Press Vehicle Finder button, the indicator light flashes 15 seconds and siren beep 15 seconds, Allow owners to find the location of the vehicle, to stop press any button.

6. Anti-robbery and Assistance: When the motocycle is bobbed and is drive away, the motorcycle owner only press the Arm/Anti-robbery button, the engine will stop at once, the siren will beep and the indicator light will flash.

7. Shock Sensor:

Warn away: After arming if any light impact, the indicator light flashes 5 times and siren beep 5 times.

Full Trigger: After arming if any heavy impact, the indicator light flashes 1 seconds and siren beep (6 tones) 15 seconds.

8. Ignition Trigger: The ignition trigger: in the alarm state, if anyone tries to ignition, the siren starts alarming and the indicators starts flashing.

9. Immobilizer: in the alarm state, the siren starts alarming, the indicator light flashes and the engine cannot be started.

10. Shock Sensor Setting: Keep pressing the fine vehicle button, the remote can adjust the sensor sensitivity of level 1 to 5, according the number of siren beep to set level, (level 1 lowest, level 2 low, ... , level 5 highest)

Note: for remote start engine type